High Flow pump range
The High Flow pump range has a flowrate of 0-27ml/s at 10RPS. Depending on the application, up to 30ml/s can be achieved by running the pumps at 11RPS. The 20mm rotor carries 2 cavities each with a resolution of 1.35ml. A range of pump configurations provide in-pump dilution, valves and mixers on the outlet. Low-pressure and high-pressure pumps are also available. QX260-DL dilution pumps can manage any dilution ratio from 1:1 to 1:30 where the concentrate flow rate is up to 27ml/s. The diluent flow rate is controlled by pressure regulation and a custom orifice moulded into the pump. See the product range below for more details.
Previously known as the Series 20 range. Click here to learn more.
QX100-SD and QX100-HP
Suitable for high viscosity liquids and soft particulates
Features:
- Flowrate: 0-27ml/s or 0-0.91floz/s at 10RPS*
- Pressure regulating <10psig, high vacuum -7.5psig
- 12mm OD inlet and outlet
- 1.35ml resolution with 2 bolus rotor
- Viscosity capability <100,000 cP
- Pump particulates up to 4mm in diameter
- High and Low pressure options available
- Various fittings available: see brochure
- High Pressure pump <50psi
*Depending on the application, up to 30ml/s can be achieved by running the pumps at 11RPS.
QX260-DL
Disposable pump with dilution
Features:
- In-pump dilution
- Flowrate: 0-27ml/s or 0-0.91floz/s at 10RPS*
- Pressure regulating <10psig, high vacuum -7.5psig
- 12mm OD inlet and outlet
- 1.35ml resolution with 2 bolus rotor
- Viscosity capability <100,000 cP
- Pump particulates up to 4mm in diameter
- Various fittings available: see brochure
*Depending on the application, up to 30ml/s can be achieved by running the pumps at 11RPS.
Evaluation kit
Evaluation kit for testing the High Flow pump range
Features:
- For testing and evaluating the series 20 pump
- High resolution stepper motor
- Custom motor controller unit
- Tablet computer with easy to use software
- Step-by-step instruction manual
Pump finder tool
Use the fields below to help you identify which Quantex pump is most suitable for you. Select the maximum target flowrate that is immediately above your requirements.